HYPAC Hydraulic Systems - DC Power Units

DC Power Units

Intermittent Duty

Description		Part Number
DC Power Units	19 CU IN.	25 CU IN.	60 CU IN.
6V Intermittent Duty, 1/3 HP No Relief , 1/2 GPM	2101188	2101189	2101190
12V Intermittent Duty ,1/3 HP No Relief ,1/2 GPM	2017922	2024461	2101191
12V Intermittent Duty, 1/3 HP With Relief, 1/2 GPM	2024470	2024456	2101192
12V Intermittent Duty, 1/3 HP With Relief, 3/4 GPM	2101193	2101194	2101195

Specifications

Duty Cycle: Intermittent
Type: Field Wound
Rotation: Bi-Direction (instantly reversible)
HP: 1/3
Protection: Thermal Overload
Reservoir Cap: 19 / 25 Cu In. *
* 60 Cu In. Available Upon Request

Wiring Legend: Red & Black Leads To Line Pressure At Port "B" Yellow & Black Leads To Line Pressure At Port "A"

Extended Duty

Description		Part Number
DC Power Units	19 CU IN.	25 CU IN.	60 CU IN.
12V Continuous Duty 1/3 HP
1/2 GPM	2024293	2024350	2101175
3/4 GPM	2101032	2101034	2101176
1 GPM	2101033	2101035	2101177
24V Continuous Duty 1/2 HP
1/2 GPM	2101178	2101181	2101184
3/4 GPM	2101179	2101182	2101185
1 GPM	2101180	2101183	2101186
12V Continuous Duty Direct Line Pump 1/3 HP No Reservoir - 2101012
24V Continuous Duty Direct Line Pump 1/3 HP No Reservoir - 2101187

Specifications

Type: Permanent Magnet
Rotation: Bi-Directional (instantly reversible)
HP: 1/3
Reservoir Cap: 19 / 25 Cu In. *
* 60 Cu. In. Available Upon Request

HYPAC extended duty DC power units are not equipped with overload protection. Duty cycle is contingent upon operating conditions and value of in-line fusing. Motor temperature should not exceed 240°F.

Wiring Legend

Clockwise Rotation:
Orange to Negative
Black to Positive

C'clockwise Rotation:
Orange to Positive
Black to Negative

B A C K